STOP: 0x0000007e Error Fixes

STOP: 0x0000007e occurs when Windows crashes to prevent serious damage to your computer. Blue Screens are a sign of a critical system problem that may result in system corruption or even data loss. That is why 0x0000007e should be resolved as soon as possible.

But you shouldn’t hurry to pay from $250 to $500 or even more to computer repair guys (that’s the amount that can be requested for routine manipulations you could do on your own at little or no cost). We hope our tips and guides help you fix STOP: 0x0000007e and save your dollars for something really worth that money.

If you are not a computer expert use the following first-aid solution:

  • Free Download 0x0000007E Repair Tool.0x0000007E solution: Start FREE Download
  • Currently, this is my favorite tool because it fixed 0x0000007E and 100% of other errors I had.
  • It automatically repairs a wide range of Windows problems, including 0x0000007E and other blue screen errors, freezes, registry corruption, system and hardware instability, .DLL and .sys errors, slow speed and other problems.
  • It is widely used by PC technicians to fix Windows errors.
  • Download the program, install and launch it.
  • Let the program scan your computer and repair the errors.

If you cannot start Windows even in Safe Mode, check the list of specific 0x0000007e cases and possible solutions below. Important! Some of the suggestions below include registry, BIOS and core system settings manipulation. These steps are recommended only to advanced computer users because incorrect manipulations may seriously damage of even disable the system or damage the data. Use specialized software or apply to professional technical support if you are not an expert. Don’t forget to scan the system with reliable registry repair program after modifying it to avoid new errors and conflicts!

STOP: 0x0000007e Error: Explanation

Typically, 0x0000007e is caused by malware (viruses, trojans, rootkits) or the damage they have done to your system, damaged or faulty system files (im most cases, .dll or .sys files), damaged registry and invalid (orphaned) registry keys gathered in the system, a system service or device driver, BIOS incompatible with Windows, incompatible drivers or third-party remote control program.

Generally, the error message looks like this:

Stop 0x0000007E (parameter1, parameter2, parameter3, parameter4) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

The parameters in parenthesis vary, depending on your computer configuration and error cause. Additionally, file names may be mentioned prompting on a possible cause of the error.

STOP: 0x0000007e Error and Malware

A great number of blue screen errors, including 0x0000007e, may be caused by malicious applications. If 0x0000007e occurs occasionally and you start Windows successfully in most cases, scan your system for malware. We highly recommend the tool suggested on this page because this is the only tool that not just detects and removes malware (virus, trojan, rootkit) but also repairs the damage it has already done to your system!.

STOP: 0x0000007e, Corrupt Registry and Orphaned Entries

The Registry is a centralized database that stores all configuration settings of your system, user preferences, hardware devices, software programs and much more. Many Windows errors, such as 0x0000007E, are caused by the registry problems. Many experts describe the registry a single point of failure (SPOF). This means that every component of the system depends on the registry and if the registry fails, the entire system will be disabled.

As you use your computer, install and uninstall programs, invalid registry entries pile up, slowing down your computer and even causing crashes. If you install new programs over old ones without proper deletion that makes the situation worse. You should either manually remove invalid entries from the registry 0x00000007E, or use specialized software for this.

We recommend using the tool suggested above. Registry errors is not the only possible cause of error 0x00000007E, and this tool not just fixes the registry but also repairs most of other possible causes of this error.

This tool fixed errors and slow-downs on millions computers!

Remove 0x0000007e error - scan your system for FREE right now!

STOP: 0x0000007e Error and Drivers

Various sorts of driver troubles may cause BSODs, including 0x0000007e. If 0x0000007e began to occur after new driver installation or update, try to reverse the changes and see if 0x0000007e disappears. If possible, try to use drivers provided by your hardware or device manufacturer. Also, some of your drivers may need to be updated.

STOP: 0x0000007e 0xc0000005 Error Combination

STOP: 0x0000007e error message may look like this:

*** STOP 0x0000007E (0xc0000005, 0x9103106D, 0x8BB5F894, 0x8BB5F590) The parameters in parenthesis vary, but the first one is always 0xc0000005 (memory access violation code). STOP: 0x0000007e 0xc0000005 combination often points to driver issues or malware. Read how to fix STOP: 0x0000007e 0xc0000005.

STOP: 0x0000007e Error and Non-Intel Processor

0x0000007e may occur at restart if your computer uses a processor other than Intel and you’ve been upgrading to Windows XP SP2 or to Windows XP SP3. 0x0000007e BSOD occurs when a System Preparation (Sysprep) image is created on a computer equipped with an Intel processor and is then utilized on a computer that uses a processor other than Intel. An orphaned registry key remains from the original Sysprep image, that is why during startup the Intel processor driver (Intelppm.sys) is trying to load, which caused the 0x0000007e crash. To remove that cause, you need start up in Safe Mode and locate the following key in the registry:


Ascribe the value 4 to the Start entry Attention! Modifying the registry in the wrong way may cause serious damage to your system. That is why it is recommended to use specialized registry repair software for this which cleans out invalid entries and creates backup of your registry at your request. After removing the bad registry key, restart your computer: 0x0000007e should be gone then.

STOP: 0x0000007e Error and ConnectMultiplePorts Registry Entry

Stop 0x0000007E may occur on a Windows XP based computer with the Microsoft Systems Management Server (SMS) 2003 client where ConnectMultiplePorts Registry Entry has been configured. In this case the Microsoft company recommends to disable ConnectMultiplePorts registry entry.

STOP: 0x0000007e Error and Upgrade to Windows XP

Very often 0x0000007e occurs after you upgrade you system to Windows XP and it looks like this:

STOP: 0x0000007E (0xC0000005, 0x804E518E, 0xFC938104, 0xFC937E04) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED WUSB54GCx86.sys- Address 92D89498 base at 92D7c000, Datestamp 45c04cc9

Low Disk Space

First of all, check if you have sufficient disk space. Use safe Mode or the Recovery Console to delete all unnecessary files and data, internet cache, program backup, temporary files. Alternatively, you may try installing Windows on a disk with more disk space. If you keep getting STOP: 0x0000007e during startup, pass on to BIOS issue.


You may need to update BIOS. You’ll have to contact hardware vendor for the latest version. It is recommended that you temporarily disable BIOS memory options, such as shadowing or caching while updating BIOS.

Drivers and Remote Control Services

If 0x0000007e remains after successful BIOS update, video adapter drivers may need to be updated of disabled. If the .sys file was mentioned in the STOP: 0x0000007, that is most likely to be the case. Disable or delete the driver by starting up in Safe Mode or Recovery Console (if the file is used in the startup process). If no files are mentioned in the STOP: 0x0000007 message, try updating video adapter drivers. If that doesn’t help, uninstall or disable the most recently installed drivers or services. Specifically, that concerns the drivers not signed by Microsoft.

STOP: 0x0000007e Error and BitLocker Drive Encryption

0x0000007e may occur after enabling BitLocker Drive Encryption feature in Windows Vista if you installed certain drivers on your computer before using this feature, such as chipset drivers. The problem can be resolved by obtaining the latest service pack for Windows Vista.

STOP: 0x0000007e and Creative Labs SoundBlaster 16 Joystick

0x0000007e occurs on Windows XP based computers using Creative Labs SoundBlaster 16 Joystick with a game port. Microsoft suggests removing the Creative Labs SoundBlaster joystick from Device Manager and using another game controller instead (for example, USB game controller). Alternatively, you can try to start up in Safe Mode and reinstall the Creative SoundBlaster Live Value device driver.

STOP: 0x0000007e and pci.sys

STOP 0x0000007e may occur during Windowx XP installation with the error message similar to the following:

STOP: 0X0000007E (0XC0000005, 0XF738E4BF, 0XF79DA608, 0XF98D9E08)

pci.sys - Address F738E4BF base at F7487000, Datestamp 3b7d855c

This mostly occurs on Windows versions without service packs. Installing Windows with SP1 or SP2 should resolve the issue.

Hotfixes for 0x0000007E

Some of the instances of error 0*0000007E can be resolved with the help of hotfixes provided by Microsoft. Attention! Each hotfix repairs only one specific case of 0x7E it was created for. It does not reapir other instances of this error code.

The software we recommened on this page fixes all of the issues that require a hotfix because it automatically replaces all faulty, outdated or damaged system files with good files taken from the most up-to-date Windows file replacement database.

STOP: 0x0000007e And Registry Management Problem

This kind of problem may occur on computers running Windows Vista Service Pack 1 (SP1) or Windows Server 2008 because mapped views in memory module are managed by the registry incorrectly. If the first parameter in parenthesis is 0xc0000005, that is probably the case. Microsoft offers a hotfix designed to repair specifically this case of 0x0000007e.

STOP: 0x0000007e When Running Backup Application in Win7 and in Win2008 R2

This kind of error occurs when you run an application depending on Volume Shadow Copy Service because Volume Shadow Copy driver (Volsnap.sys) attempts to delete a freed device object. A hotfix from Microsoft is available for this specific problem.

Enabling NFS File Audit While Logging Windows Server 2003 R2

As a rule, the first parameter in parenthesis in this case is c0000005. A hotfix applicable specifically for this case of 0x0000007e error is available from Microsoft.

Operation failed with error 0x0000007e

This error message appears when your computer tries to establish connection with a shared printer. A hotfix applicable specifically for this problem is available from Microsoft.

We regularly update our list of fixes for the STOP: 0x0000007e error. If STOP: 0x0000007e still occurs and you still don’t know what the cause is, use the all-in-one solution suggested below.

All-in-One Solution for STOP: 0x0000007e and other errors

If nothing helps resolve STOP: 0x0000007e, it is highly recommended to use this tool: