STOP: 0x0000007e Error Fixes
STOP: 0x0000007e occurs when Windows crashes to prevent serious damage to your computer. Blue Screens are a sign of a critical system problem that may result in system corruption or even data loss. That is why 0x0000007e should be resolved as soon as possible.
But you shouldn’t rush to pay from $250 to $500 or even more to computer repair guys (that’s the amount that can be requested for routine manipulations you could do on your own at little or no cost). We hope our tips and guides help you fix STOP: 0x0000007e and save your dollars for something really worth that money.
If you are not a computer expert use the following first-aid solutions:
Recommended if you can enter Windows, either normally or in Safe Mode:
Free Download 0x0000007E Repair Tool.
Reimage detects and fixes a wide range of Windows problems, including 0x0000007E and other blue screen errors, freezes, system file and registry damage, system and hardware instability, malware and other problems. This is the only tool that not just detects and removes viruses but also repairs the damage done to the system by a virus. Reimage is widely used by PC technicians to fix Windows errors.
- Download the program, install and launch it.
- Let the program scan your computer and repair the errors.
Reimage is widely used by PC technicians to fix Windows and remove errors. The tool is based on a patented technology that uses a new approach to repairing the system. Being the only program of the kind, Reimage is not just a registry or driver fix, PC optimizer or an anti-virus scanner. Unlike other system repair solutions, Reimage is an all-in-one fix for the whole system and the only tool that reverses the damage already done to your system (The comparison chart is given below).
Recommended if you cannot enter Windows because of 0x0000007E at startup or logon:
Use this 0x0000007e Repair Tool.
Spotmau BootSuite 2012 is designed specifically to boot unbootable computers and recover Windows, fix blue screen errors, corrupt registry, partition table, damaged system files and other Windows problems, including security issues.
- Follow the simple instruction and enter your crashed system.
- Let the utility recover Windows and fix the errors to prevent problems in future.
If you cannot start Windows even in Safe Mode, check the list of specific 0x0000007e cases and possible solutions below. Important! Some of the suggestions below include registry, BIOS and core system settings manipulation. These steps are recommended only to advanced computer users because incorrect manipulations may seriously damage of even disable the system or damage the data. Use specialized software or apply to professional technical support if you are not an expert. Don’t forget to scan the system with reliable registry repair program after modifying it to avoid new error and conflicts!
STOP: 0x0000007e Error: Explanation
Typically 0x0000007e is caused by damaged registry and invalid (orphaned) registry keys gathered in the system, a system service or device driver , a virus, BIOS incompatible with Windows, incompatible drivers or third-party remote control program. Generally, the error message looks like this:
Stop 0x0000007E (parameter1, parameter2, parameter3, parameter4)
The parameters in parenthesis vary, depending on the your computer configuration and error cause.
Additionally, file names may be mentioned prompting on a possible cause of the error.
STOP: 0x0000007e, Corrupt Registry and Orphaned Entries
The Registry is a centralized database that stores all configuration settings of your system, user preferences, hardware devices, software programs and much more. Many Windows errors, such as 0x0000007E, are caused by the registry problems. Many experts describe the registry a single point of failure (SPOF). This means that every component of the system depends on the registry and if the registry fails, the entire system will be disabled.
As you use your computer, install and uninstall programs, invalid registry entries pile up, slowing down your computer and even causing crashes. If you install new programs over old ones without proper deletion that makes the situation worse. You should either manually remove invalid entries from the registry or use specialized software for this.
TuneUp360 is an award-winning PC tool acknowledged to be the world’s
best registry cleaner by experts and editors.
It is one of the most popular and easy to use registry repair tools
that safely repairs and optimizes your registry and improves your computer’s performance in a few simple mouse clicks.
TuneUp360 resolved computer errors and slow-downs on millions computers!
Remove 0x0000007e error - scan your system for FREE right now!
STOP: 0x0000007e Error and Drivers
Various sorts of driver troubles may cause BSODs, including 0x0000007e. If 0x0000007e began to occur after new driver installation or update, try to reverse the changes and see if 0x0000007e disappears. If possible, try to use drivers provided by your hardware or device manufacturer. Also, some of your drivers may need to be updated.
STOP: 0x0000007e 0xc0000005 Error Combination
STOP: 0x0000007e error message may look like this:
*** STOP 0x0000007E (0xc0000005, 0x9103106D, 0x8BB5F894, 0x8BB5F590)
The parameters in parenthesis vary, but the first one is always 0xc0000005 (memory access violation code).
STOP: 0x0000007e 0xc0000005 combination often points to driver issues. Read how to
fix STOP: 0x0000007e 0xc0000005.
STOP: 0x0000007e Error and Malware
A great number of blue screen errors, including 0x0000007e, may be caused by malicious applications. If 0x0000007e occurs occasionally and you start Windows successfully in most cases, scan your system for malware.
STOP: 0x0000007e Error and Non-Intel Processor
0x0000007e may occur at restart if your computer uses a processor other than Intel and you’ve been upgrading to Windows XP SP2 or to Windows XP SP3. 0x0000007e BSOD occurs when a System Preparation (Sysprep) image is created on a computer equipped with an Intel processor and is then utilized on a computer that uses a processor other than Intel. An orphaned registry key remains from the original Sysprep image, that is why during startup the Intel processor driver (Intelppm.sys) is trying to load, which caused the 0x0000007e crash. To remove that cause, you need start up in save mode and locate the following key in the registry:
Ascribe the value 4 to the Start entry Attention! Modifying the registry in the wrong way may cause serious problems. That is why it is recommended to use specialized registry repair software for this which cleans out invalid entries and creates backup of your registry at your request. After removing the bad registry key, restart your computer: 0x0000007e should be gone then.
STOP: 0x0000007e Error and ConnectMultiplePorts Registry Entry
Stop 0x0000007E may occur on a Windows XP based computer with the Microsoft Systems Management Server (SMS) 2003 client where ConnectMultiplePorts Registry Entry has been configured. In this case the Microsoft company recommends to disable ConnectMultiplePorts registry entry.
STOP: 0x0000007e Error and Upgrade to Windows XP
Very often 0x0000007e occurs after you upgrade you system to Windows XP and it looks like this:
STOP: 0x0000007E (0xC0000005, 0x804E518E, 0xFC938104, 0xFC937E04) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED WUSB54GCx86.sys- Address 92D89498 base at 92D7c000, Datestamp 45c04cc9
Low Disk Space
First of all, check if you have sufficient disk space. Use safe Mode or the Recovery Console to delete all unnecessary files and data, internet cache, program backup, temporary files. Alternatively, you may try installing Windows on a disk with more disk space. If Windows you keep getting STOP: 0x0000007e during startup, pass on to BIOS issue.
You may need to update BIOS. You’ll have to contact hardware vendor for the latest version. It is recommended that you temporarily disable BIOS memory options, such as shadowing or caching while updating BIOS.
Drivers and Remote Control Services
If 0x0000007e remains after successful BIOS update, video adapter drivers may need to be updated of disabled. If the .sys file was mentioned in the STOP: 0x0000007, that is most likely to be the case. Disable or delete the driver by starting up in Safe Mode or Recovery Console (if the file is used in the startup process). If no files are mentioned in the STOP: 0x0000007 message, try updating video adapter drivers. If that doesn’t help, uninstall or disable the most recently installed drivers or services. Specifically, that concerned the drivers not signed by the Microsoft.
STOP: 0x0000007e Error and BitLocker Drive Encryption
0x0000007e may occur after enabling 0x0000007e BitLocker Drive Encryption feature in Windows Vista if you installed certain drivers on your computer before using this feature, such as chipset drivers. The problem can be resolved by obtaining the latest service pack for Windows Vista.
STOP: 0x0000007e and Creative Labs SoundBlaster 16 Joystick
0x0000007e occurs on Windows XP based computers using Creative Labs SoundBlaster 16 Joystick with a game port. Microsoft suggests remove the Creative Labs SoundBlaster joystick from Device Manager and use another game controller instead (for example, USB game controller). Alternatively, you can try to start up in Safe Mode and reinstall the Creative SoundBlaster Live Value device driver.
STOP: 0x0000007e And Registry Management Problem
This kind of problem may occur on computers running Windows Vista Service Pack 1 (SP1) or Windows Server 2008 because mapped views in memory module are managed by the registry incorrectly. If the first parameter in parenthesis is 0xc0000005, that is probably the case. Microsoft offers a hotfix designed to repair specifically this case of 0x0000007e.
STOP: 0x0000007e When Running Backup Application in Win7 and in Win2008 R2
This kind of error occurs when you run an application depending on Volume Shadow Copy Service because Volume Shadow Copy driver (Volsnap.sys) attempts to delete a freed device object. A hotfix from Microsoft is available for this specific problem.
Enabling NFS File Audit While Logging Windows Server 2003 R2
As a rule, the first parameter in parenthesis in this case is c0000005. A hotfix applicable specifically for this case of 0x0000007e error is available from Microsoft.
STOP: 0x0000007e and pci.sys
STOP 0x0000007e may occur during Windowx XP installation with the error message similar to the following:
STOP: 0X0000007E (0XC0000005, 0XF738E4BF, 0XF79DA608, 0XF98D9E08)
pci.sys - Address F738E4BF base at F7487000, Datestamp 3b7d855c
This is mostly occurs on Windows versions without service packs. Installing Windows with SP1 or SP2 should resolve the issue.
We regularly update our list of fixes for the STOP: 0x0000007e error.
If STOP: 0x0000007e still occurs and you still don’t know what’s the cause, use the all-in-one solution suggested below.
Operation failed with error 0x0000007e
This error message appears when you computer tries to establish connection with a shared printer. A hotfix applicable specifically for this problem is available from Microsoft.
All-in-One Solution for STOP: 0x0000007e and other errors
If nothing helps resolve STOP: 0x0000007e, it is highly recommended to use this tool:
- Error 0x0000007E
- STOP 0x0000007E in Windows Vista
- STOP 0x0000007E in Windows XP
- What is Registry?
- Registry Repair
- BSOD (Blue Screen Of Death) Explained
- STOP: 0x0000007e Error Fixes
- STOP: 0x0000007e Error: Explanation
- STOP: 0x0000007e, Corrupt Registry and Orphaned Entries
- STOP: 0x0000007e Error and Drivers
- STOP: 0x0000007e 0xc0000005 Error Combination
- STOP: 0x0000007e Error and Malware
- STOP: 0x0000007e Error and Non-Intel Processor
- STOP: 0x0000007e Error and ConnectMultiplePorts Registry Entry
- STOP: 0x0000007e Error and Upgrade to Windows XP
- STOP: 0x0000007e Error and BitLocker Drive Encryption
- STOP: 0x0000007e and Creative Labs SoundBlaster 16 Joystick
- STOP: 0x0000007e And Registry Management Problem
- STOP: 0x0000007e When Running Backup Application in Win7 and in Win2008 R2
- Enabling NFS File Audit While Logging Windows Server 2003 R2
- STOP: 0x0000007e and pci.sys
- Operation failed with error 0x0000007e
- All-in-One Solution for STOP: 0x0000007e and other errors